POMODORO PURE HYBRID COLLECTION VICTORIA VYNN 8ML 262-267

The Pure Hybrid nail polishes present their new colors from the Pomodoro collection.

The Pure Creamy Hybrid nail polish by VICTORIA VYNN is the first semi-permanent polish on the market that can be removed with alcohol. The Pure Creamy Hybrid collection by Victoria Vynn consists of creamy semi-permanent polishes that respect the natural nail. Its texture is creamy and provides 100% coverage of the nail.

In some cases, they last up to 4 weeks.

Characteristics:

Creamy hybrid nail polish

Safe for nails, hands, and the nail technician.

Formula without irritating odor and with a creamy texture.

100% coverage from the first coat of color.

Glass nail effect and long-lasting shine until removal.

3 steps: base, color, top.

Creamy consistency hybrid polish.

Safe for hands, nails, and the technician, hypoallergenic (tested).

Formula without unpleasant smell.

Self-leveling properties.

100% coverage after the first coat due to high pigment quality.

Crystal-like, long-lasting shine until removal.

Long duration of up to 4 weeks.

3 steps: base, color, top.

LED lamp curing: 36W in 30s, 24W in 60s, 18W in 90s, 12W in 120s.

Recommended LED curing time: only 30 seconds.

FORMAT: 8ml

TEXTURE:

Creamy and self-leveling texture polishes.

STEP BY STEP:

PREPARATION

1. Disinfect our hands and the client’s hands and remove any existing polish.
2. Exfoliate and remove cuticles with CUTICLE AWAY and a pusher.
3. Shape the nail with a file (use grit higher than 180 for natural nails).
4. Gently buff the nail plate with a buffer block.
5. Remove dust with a brush (preferably synthetic) and degrease the nail with a pre-cut cotton pad soaked in DUO PREP. (DEHYDRATOR can also be used. A regular cleanser should not be used, as fragrance may reduce wear time.)

APPLICATION

1. Apply a thin layer of PURE BASE without touching the cuticle, pressing with the brush. Cure under LED lamp*.
2. Apply a thin layer of PURE COLOR, cure under LED lamp* and repeat for a second coat.
3. Apply a thin layer of PURE TOP, cure under LED lamp* (double curing time for full crystallization). Let cool for 5 seconds to enhance color.
4. Remove sticky residue with DUO PREP or CLEANER FINISH MANICURE.
5. Moisturize cuticles with 5 OIL COMPLEX.

*LED curing times depending on power: 36W 30s, 24W 60s, 18W 90s, 12W 120s.

REMOVAL – With Remover Manicura Soak Off

1. Disinfect hands of both client and technician.
2. Apply a cotton pad soaked with REMOVER Manicura Soak Off, wrap with foil and apply NAIL CLIPS.
3. Remove after approximately 7–10 minutes and remove remaining product with an orange stick.

REMOVAL – With Alco Remover (acetone-free)

1. Disinfect hands of both client and technician.
2. Fully break the Top coat layer with a nail file.
3. Apply a cotton pad soaked with ALCO REMOVER, wrap with foil and apply NAIL CLIPS.
4. Remove after approximately 15 minutes and remove remaining product with an orange stick.